Hit enter to search or ESC to close
2 November 2026
A practical selection guide to the PET Gabion Wire Mesh Weaving Machine, covering mesh opening, wire diameter, working width, material compatibility, operating mode, and gabion applications. It explains which production situations suit this machine and which specifications buyers should prepare when requesting a quotation.
Mesh opening and wire diameter must match the planned gabion basket or stone-cage design: the machine supports 60 × 80 mm, 80 × 100 mm, and 100 × 120 mm openings with a 1.3 to 3.5 mm wire diameter range.
The machine must match the production material, width, and workflow: it is designed for PET or polyester monofilament, supports a maximum mesh width of 3,700 mm, and is available in automatic or semi-automatic operation.
The installation plan must accommodate the horizontal structure, 37.5 kW motor power, 5.5-ton machine weight, and the required gabion or stone-cage production route.
PET gabion mesh production depends on a close match between the machine, the monofilament, and the stone-cage design. Buyers comparing a PLC Gabion Wire Mesh Machine Manufacturer should start with the mesh opening and wire diameter required for the finished gabion basket, then check width, material compatibility, and the operating mode.
The PET Gabion Wire Mesh Weaving Machine is designed for PET or polyester monofilament and produces hexagonal mesh for gabion baskets and stone cages.
The machine supports mesh sizes of 60 × 80 mm, 80 × 100 mm, and 100 × 120 mm. These opening options can match different stone sizes and basket designs used in production.
A plant making more than one gabion format can use these openings as the first point in its production plan. Confirm the opening required for each product before ordering, especially if the same line will serve several basket sizes. Customization is available on request, so include the required mesh schedule in the quotation discussion.
The supported wire diameter is 1.3 to 3.5 mm. The machine is intended for PET or polyester monofilament, so the incoming material plan should be built around this range and material type.
This selection suits a producer moving into PET stone-cage mesh or a line dedicated to polyester monofilament. A buyer planning galvanized or PVC-coated steel wire should select equipment matched to that material instead of treating this PET machine as a general-purpose steel-wire line.
The maximum mesh width is 3,700 mm. Measure the required finished mesh width against this limit before placing an order. A plant producing wide gabion panels should also check the space available for the horizontal machine structure, material handling, and finished-mesh movement.
Picture the production route from monofilament supply to the woven panel and then to storage or basket assembly. The machine weighs 5.5 tons, so the installation plan should account for its placement and the movement of finished mesh around it.
The machine is available in automatic or semi-automatic operation. Automatic operation suits a production plan that prioritizes reduced manual intervention. Semi-automatic operation can suit a team that expects more operator participation in the line process.
The controls use PLC-controlled double-twist data, and the machine is described as having smooth operation and low noise. Buyers should identify the preferred operating mode and include the expected production workflow in the equipment inquiry.
The listed application is gabion baskets and stone cages. PET monofilament is also naturally resistant to rust and chemicals, which suits outdoor or underwater stone-cage projects where the chosen mesh material must address exposure conditions.
The product is a focused choice for manufacturers producing PET reinforcement mesh for these applications. Match its material range, opening options, wire diameter, and maximum width to the buyer's basket drawings before purchase.
The machine uses a horizontal structure and has a listed motor power of 37.5 kW. Installation planning should cover the machine position, electrical arrangement, and material flow. Circuit diagrams, operation manuals, and layout plans support installation planning, while on-site technicians are available for debugging and staff training.
Send the supplier the required mesh openings, wire diameter, panel width, PET monofilament details, preferred automatic or semi-automatic mode, basket drawings, and planned quantity. These details will help the PLC Gabion Wire Mesh Machine Manufacturer confirm a suitable configuration for the production line.
The people
About the author
The company
Dingzhou Mingyang wire mesh factory, is a professional wire mesh machinery factory. Its predecessor was founded in 1988, in 2005 officially changed its name to Dingzhou Mingyang Wire mesh Machine Factory ，in 2016 we set up Hebei Hengtuo Machinery Equipment Co., LTD., in 2020 set up Hebei Mingyang Intelligent Equipment Co., LTD. The factory covers an area of more than 30,000 square meters. It’s integrated research and development, production, sales as one of the manufacturers.…
About Us ↗Visit company website ↗Your next step
Use case, specification, quantity and delivery window: make the next conversation specific.
